Package: datron_1061a_ieee_5700.mcz
Become a MET/SUPPORT Gold Member to download this package!

Procedures in Package

Click on the procedure names to find out details about the procedure files containing them.

Datron 1061A: (90 Day) CAL VER IEEE /5700, Revision: 1.2

Datron 1061A: (1 Year) CAL VER IEEE /5700, Revision: 1.2

Datron 1061A: CAL ADJ IEEE /5700, Revision: 1.2

Details about Procedure Files

Below is a list of procedure files (.pro files) in the package.

Subprocedures and procedures files that only contain subprocedures have been excluded.

The references of the subprocedure files have been included.

Datron 1061A: (90 Day) CAL VER IEEE /5700

Date: 2002-12-06

Revision: 1.2

Automated Reference: Fluke 5700A

Models covered: 1061A

Source: Users Handbook

Part Number 850040

Issue 11 (OCT.1986)

Portocal II

Verify to 90 day

Datron 1061A

Version 1.10

Pre Adjustment Procedure

Compatibility: MET/CAL 6.11A or later

Subprocedures: Sub Wait

Sub Datron 10xx Take Reading IEEE

Sub Datron 10xx Input Zero IEEE

Required Files: 1081back - Power Lead and IEEE Connection Bitmap

1081_dis - Cal key set to RUN Bitmap

1081in57 - Connections Bitmap

Additional equipment Required:

The Procedure was tested using:

Model No 1061A

Serial No 14262

Options 10 20 30 40 50

The average run time during testing was 55 minutes.

The procedure is intended for use with Met/Cal(r) calibration software,

and the terms and conditions set forth in your METCAL license apply to

this procedure.

Due to our policy of continuously up dating our products, this procedure

may contain minor differences in specification to those found in the manual

or other documentation. While every effort has been made to ensure that

this procedure is accurate, Fluke cannot be held responsible for the

consequences of error or omissions found within this procedure.

The copyright in this procedure is owned by Fluke Precision Measurement

Limited.

Registers Used

M[1]= Average Readings Counter (Adjustment)

M[2]= Readings to Discard (Adjustment)

M[3]= Sum of Averages (Adjustment)

M[4]= Average of Readings (Adjustment)

M[6]= First Delimited Value to Identify Option 12

M[7]= Second Delimited Value to Identify Option 12

M[10]= Number of Readings Reqd (Adjustment)

M[255]= Delay Time Total

M[101]= Adjustment Retry Counter

M[102]= Invalid Measurement Counter

M[103]= Units Multiplier

M[104]= Tolerance

M[105]= Tight Tolerance % Multiplier

M[106]= Delay Time Remain Counter

M[107]= Tight Limit Calculated

S[32] = Delay Time Message

S[2] = Range String

S[10]= DCV Function Selected

S[11]= ACV Function Selectied

S[12]= Resistance Function Selected

S[13]= DCI Function Selected

S[14]= ACI Function Selected

S[20]= DCV Function Option Fitted

S[21]= ACV Function Option Fitted

S[22]= Resistance Function Option Fitted

S[23]= DCI Function Option Fitted

S[24]= ACI Function Option Fitted

S[25]= Message to explain that Option 12 is not supported.

Datron 1061A: (1 Year) CAL VER IEEE /5700

Date: 2002-12-06

Revision: 1.2

Automated Reference: Fluke 5700A

Models covered: 1061A

Source: Users Handbook

Part Number 850040

Issue 11 (OCT.1986)

Portocal II

Verify to 365 day

Datron 1061A

Version 1.10

Pre Adjustment Procedure

Compatibility: MET/CAL 6.11A or later

Subprocedures: Sub Wait

Sub Datron 10xx Take Reading IEEE

Sub Datron 10xx Input Zero IEEE

Required Files: 1081back - Power Lead and IEEE Connection Bitmap

1081_dis - Cal key set to RUN Bitmap

1081in57 - Connections Bitmap

Additional equipment Required:

The Procedure was tested using:

Model No 1061A

Serial No 14262

Options 10 20 30 40 50

The average run time during testing was 55 minutes.

The procedure is intended for use with Met/Cal(r) calibration software,

and the terms and conditions set forth in your METCAL license apply to

this procedure.

Due to our policy of continuously up dating our products, this procedure

may contain minor differences in specification to those found in the manual

or other documentation. While every effort has been made to ensure that

this procedure is accurate, Fluke cannot be held responsible for the

consequences of error or omissions found within this procedure.

The copyright in this procedure is owned by Fluke Precision Measurement

Limited.

Registers Used

M[1]= Average Readings Counter (Adjustment)

M[2]= Readings to Discard (Adjustment)

M[3]= Sum of Averages (Adjustment)

M[4]= Average of Readings (Adjustment)

M[6]= First Delimited Value to Identify Option 12

M[7]= Second Delimited Value to Identify Option 12

M[10]= Number of Readings Reqd (Adjustment)

M[255]= Delay Time Total

M[101]= Adjustment Retry Counter

M[102]= Invalid Measurement Counter

M[103]= Units Multiplier

M[104]= Tolerance

M[105]= Tight Tolerance % Multiplier

M[106]= Delay Time Remain Counter

M[107]= Tight Limit Calculated

S[32] = Delay Time Message

S[2] = Range String

S[10]= DCV Function Selected

S[11]= ACV Function Selectied

S[12]= Resistance Function Selected

S[13]= DCI Function Selected

S[14]= ACI Function Selected

S[20]= DCV Function Option Fitted

S[21]= ACV Function Option Fitted

S[22]= Resistance Function Option Fitted

S[23]= DCI Function Option Fitted

S[24]= ACI Function Option Fitted

S[25]= Message to explain that Option 12 is not supported.

Datron 1061A: CAL ADJ IEEE /5700

Date: 2002-12-06

Revision: 1.2

Automated Reference: Fluke 5700A

Models covered: 1061A

Source: Calibration & Servicing Handbook

Part Number 850045

Issue 9 (SEPT.1988)

Portocal II

Adjustment

Datron 1061A

Version 1.10

Full Adjustment Procedure

Compatibility: MET/CAL 6.11A or later

Subprocedures: Sub Wait

Sub Datron 10xx Take Reading IEEE

Sub Datron 10xx Cal Adjust IEEE

Required Files: 1081back - Power Lead and IEEE Connection Bitmap

1081_dis - Cal key set to RUN Bitmap

1081in57 - Connections Bitmap

Additional equipment Required:

1 MOhm Lin Source (Datron Number 400391)

10 MOhm Ib Source (Datron Number 400392)

1 Short Link

The Procedure was tested using:

Model No 1061A

Serial No 14262

Options 10 20 30 40 50

The average run time during testing was minutes.

The procedure is intended for use with Met/Cal(r) calibration software,

and the terms and conditions set forth in your METCAL license apply to

this procedure.

Due to our policy of continuously up dating our products, this procedure

may contain minor differences in specification to those found in the manual

or other documentation. While every effort has been made to ensure that

this procedure is accurate, Fluke cannot be held responsible for the

consequences of error or omissions found within this procedure.

The copyright in this procedure is owned by Fluke Precision Measurement

Limited.

Registers Used

M[1]= Average Readings Counter (Adjustment)

M[2]= Readings to Discard (Adjustment)

M[3]= Sum of Averages (Adjustment)

M[4]= Average of Readings (Adjustment)

M[6]= First Delimited Value to Identify Option 12

M[7]= Second Delimited Value to Identify Option 12

M[10]= Number of Readings Reqd (Adjustment)

M[255]= Delay Time Total

M[101]= Adjustment Retry Counter

M[102]= Invalid Measurement Counter

M[103]= Units Multiplier

M[104]= Tolerance

M[105]= Tight Tolerance % Multiplier

M[106]= Delay Time Remain Counter

M[107]= Tight Limit Calculated

S[32] = Delay Time Message

S[2] = Range String

S[10]= DCV Function Selected

S[11]= ACV Function Selectied

S[12]= Resistance Function Selected

S[13]= DCI Function Selected

S[14]= ACI Function Selected

S[20]= DCV Function Option Fitted

S[21]= ACV Function Option Fitted

S[22]= Resistance Function Option Fitted

S[23]= DCI Function Option Fitted

S[24]= ACI Function Option Fitted

S[25]= Message to explain that Option 12 is not supported.