Package: fluke_726_cal_rs232_5520_8508.mcz
Become a MET/SUPPORT Gold Member to download this package!

Details about Procedure Files

Below is a list of procedure files (.pro files) in the package.

Subprocedures and procedures files that only contain subprocedures have been excluded.

The references of the subprocedure files have been included.

Fluke 726: (1 year) CAL VER RS-232 /5520,8508

Date: 2009-04-29 09:22:04

Revision: 1.4

Automated Reference: Fluke 5520A

Automated Reference: Fluke 8508A

Model(s) Covered: 726

This procedure contains tests whose Test Uncertainty Ratios are less

than 4:1, based on 8508A (1 year) specifications.

MILLIAMPS SOURCE: Lower Display, 24 mA Range

24 mA DC; TUR 2.6123

This procedure contains tests whose Test Uncertainty Ratios are less

than 4:1, based on 5520A (1 year) specifications.

THERMOCOUPLE MEASUREMENT: Upper & Lower Display

0 °C; TUR 2.8571

THERMOCOUPLE SOURCE: Upper & Lower Display

0 °C; TUR 2.8571

This procedure contains the following tests whose Test Uncertainty Ratio

are less than 4:1. In order to improve this, we use 8508A to characterize

the 5520A in advance for some specified test points whose TUR is lower than

3.5:1. Here is list of TUR before (TUR1) and after characterization (TUR2).

MILLIAMPS MEASUREMENT: Lower & Upper Display

4 mA DC; TUR1 3.6923 ; TUR2 11.1627

12 mA DC; TUR1 2.2069 ; TUR2 11.5523

24 mA DC; TUR1 0.9057 ; TUR2 1.4159

Source: Fluke 724/726/726 Calibrators

Calibration Manual

PN 667581, September 1999 Rev. 2, 2/06

Fluke 726 Multifunction Process Calibrator

Users Manual

September 2005

Compatibility: MET/CAL 7.20 SP1 (7.20x) or later

Additional Equipment Required:

FLUKE-700SC Serial Interface Cable Assembly (1)

DB9 null modem adapter (1)(3)

DB9 gender changer (1)(3)

2 ea. dual banana to separated single banana shielded

cable. POMONA 1368 A-30 or equivalent

Type K SMP plug to SMP plug thermocouple cable (2)

1. Included in MET/CAL-SERIAL, Closed Loop Procedure

Serial Connectivity Kit.

2. Included in 5500A/LEADS, Lead Set

3. Only needed if UUT is connected to 5520 UUT Serial

Port.

Fluke 726: CAL ADJ RS-232 /5520,8508

Date: 2009-04-29 09:22:07

Revision: 1.4

Automated Reference: Fluke 5520A

Automated Reference: Fluke 8508A

Model(s) Covered: 726

Source: Fluke 724/726/726 Calibrators

Calibration Manual

PN 667581, September 1999 Rev. 2, 2/06

Fluke 726 Multifunction Process Calibrator

Users Manual

September 2005

Compatibility: MET/CAL 7.20 SP1 (7.20x) or later

Additional Equipment Required:

FLUKE-700SC Serial Interface Cable Assembly (1), DB9(f) to DB9(f)

null modem and DB9(m) to DB9(m) gender changer (only required if

UUT is connected to 5520 UUT Serial Port) (1)

2 ea., dual banana to separated single banana shielded cable,

Pomona Model 1368 A-30 or equivalent

Type K SMP plug to SMP plug thermocouple cable (2)

1. Included in MET/CAL-SERIAL, Closed Loop Procedure

Serial Connectivity Kit.

2. Included in 5500A/LEADS, Lead Set