Package: fluke_7526_1yr_ver_rs232_5520_8508_8508prt_742.mcz
Become a MET/SUPPORT Gold Member to download this package!

Details about Procedure Files

Below is a list of procedure files (.pro files) in the package.

Subprocedures and procedures files that only contain subprocedures have been excluded.

The references of the subprocedure files have been included.

Fluke 7526A: (1 yr) VER RS-232 /5520,8508+PRT,742A-1

Date: 2013-07-02 12:38:59

Revision: 3100

Automated Reference: Fluke 5520A

Automated Reference: Fluke 8508A

Manual Reference: Fluke 742A-1

Manual Reference: Fluke 8508A-PRT

Model(s) Covered:

Fluke 7526A

This procedure contains the following tests whose Test Uncertainty Ratio

are less than 4:1, based on using a 5520A characterized using a Fluke 8508A

(1 year) specifications.

THERMOCOUPLE SOURCE

- 75 mV Range, 10.000 mV; TUR 3.38

- 75 mV Range, 15.000 mV; TUR 3.45

- 75 mV Range, 35.000 mV; TUR 3.67

- 75 mV Range, 55.000 mV; TUR 3.84

- 75 mV Range, 75.000 mV; TUR 3.97

OHMS SOURCE

- 400 Ohm Range, 200 Ohms; TUR 3.06

- 400 Ohm Range, 300 Ohms; TUR 2.52

- 400 Ohm Range, 400 Ohms; TUR 2.14

OHMS MEASUREMENT

- 400 Ohm Range, 25 Ohms; TUR 2.73

- 400 Ohm Range, 75 Ohms; TUR 2.75

- 400 Ohm Range, 95 Ohms; TUR 2.83

- 400 Ohm Range, 100 Ohms; TUR 2.84

- 400 Ohm Range, 105 Ohms; TUR 2.26

- 400 Ohm Range, 150 Ohms; TUR 2.43

- 400 Ohm Range, 300 Ohms; TUR 2.74

- 400 Ohm Range, 400 Ohms; TUR 2.82

- 4000 Ohm Range, 1500 Ohms; TUR 2.62

- 4000 Ohm Range, 2000 Ohms; TUR 2.57

- 4000 Ohm Range, 3000 Ohms; TUR 2.74

- 4000 Ohm Range, 4000 Ohms; TUR 2.82

ISOLATED DC VOLTAGE

- 100 V Range , 75 Volts ; TUR 3.83

- 100 V Range , 100 Volts; TUR 3.59

Source:

Fluke 7526A Calibration Manual March 2013 *

* The tolerances used by this procedure were taken from the

published specifications table.

The average run time during testing was 37 minutes.