Package: hp_34970a_1yr_ver_ieee_5700a_33250a.mcz
Become a MET/SUPPORT Gold Member to download this package!
Procedures in Package
Click on the procedure names to find out details about the procedure files containing them.
Agilent 34970A: (1 yr) CAL VER IEEE /5700,33250, Revision: 1.5
HP 34970A: (1 yr) CAL VER IEEE /5700,33250, Revision: 1.5
Agilent 34970A: CAL ADJ IEEE /5700,33250, Revision: 1.4
HP 34970A: CAL ADJ IEEE /5700,33250, Revision: 1.4
Details about Procedure Files
Below is a list of procedure files (.pro files) in the package.
Subprocedures and procedures files that only contain subprocedures have been excluded.
The references of the subprocedure files have been included.
Agilent 34970A: (1 yr) CAL VER IEEE /5700,33250
HP 34970A: (1 yr) CAL VER IEEE /5700,33250
Date: 2005-06-22 13:00:55
Revision: 1.5
Automated Reference: Agilent 33250A
Automated Reference: Fluke 5700A
Agilent 34970A: CAL ADJ IEEE /5700,33250
HP 34970A: CAL ADJ IEEE /5700,33250
Date: 2005-06-22 13:00:58
Revision: 1.4
Automated Reference: Agilent 33250A
Automated Reference: Fluke 5700A
Models covered:
HP/Agilent 34970A w/34901A 20 Channel Multiplexer module
The average run time during testing was 15 minutes.
Models covered:
HP/Agilent 34970A w/34901A 20 Channel Multiplexer module
The following test points have a Test Uncertainty Ratio (TUR) of less than
4 to 1.
OHMS 2 WIRE, 100 Ohm Range : 100 Ohms : TUR 3.7838
AC CURRENT, 1 A Range : 1 A @ 1 kHz : TUR 2.0290
Compatibility:
MET/CAL 7.01 SP1 or later
Required Equipment:
HP/Agilent 34901A 20 Channel Multiplexer module and associated wiring
The average run time during testing was 28 minutes.