Package: hp_8561b_1yr_ver_9640_4418_hfsg_lfctr_lo_swpg.mcz
Become a MET/SUPPORT Gold Member to download this package!
Procedures in Package
Click on the procedure names to find out details about the procedure files containing them.
HP 8561B: (1 yr) CAL VER /9640,4418,HFSG,LFCTR,LO,SWPG, Revision: 1.1
Details about Procedure Files
Below is a list of procedure files (.pro files) in the package.
Subprocedures and procedures files that only contain subprocedures have been excluded.
The references of the subprocedure files have been included.
HP 8561B: (1 yr) CAL VER /9640,4418,HFSG,LFCTR,LO,SWPG
Date: 2007-11-13 15:08:34
Revision: 1.1
Automated Reference: Agilent E4418B
Automated Reference: Agilent E9304A
Automated Reference: Fluke 9640A
Automated Reference: Fluke 9640A-50
Automated Reference: HF Signal Generator
Automated Reference: HP 8481A
Automated Reference: HP 8485A
Automated Reference: LF Counter
Automated Reference: Local Oscillator
Automated Reference: Low-Frequency Counter
Automated Reference: Sweep Generator
Manual Reference: HP 11667B
Model(s) Covered:
HP 8561B with options
Source(s):
HP 8561B Installation and Verification Guide, Part No. 08561-90053,
May 1992
T.O. 33K3-4-2935-1, Technical Manual, Calibration Procedure For
Spectrum Analyzer 8561B(), 30 October 2002
Compatibility:
MET/CAL 7.20r or later
Flexible Standard(s) Required:
Synthesized Sweeper (SWPG):
Frequency Range: 10 MHz to 12 GHz, CW
Accuracy: Locked to 10 MHz External Reference (UUT)
Amplitude Range: -35 to +16 dBm
Accuracy: ±2 dB
Internal and External (power meter) Leveling capability
SSB Phase Noise: <-80 dBc/Hz @ 50 kHz offset
HF Signal Generator (HFSG):
Frequency Range: 9 MHz to 2.5 GHz
Accuracy: ±100 kHz; Lockable to 10 MHz External Reference (UUT)
Amplitude Range: -20 to +10 dBm
Accuracy: ±2 dB
Phase Noise:
< -92 dBc/Hz @ 10 kHz offset
<-106 dBc/Hz @ 30 kHz offset
<-116 dBc/Hz @ 100 kHz offset
Local Oscillator (LO):
Frequency Range: 2.7 to 5.00005 GHz, CW
Accuracy: Locked to 10 MHz External Reference (UUT)
Amplitude Range: -20 dBm
Accuracy: ±2 dB
SSB Phase Noise: <-80 dBc/Hz @ 50 kHz offset
LF Counter (LFCTR):
Frequency Range: 10 MHz
Accuracy: Based on external frequency standard
(External frequency reference must be configured)
Time Interval Range: 30 ms to 60 s
Accuracy: ±0.25% or better (internal frequency reference)
Frequency Standard:
Frequency Range: Suitable for use with configured LF counter
Accuracy: (standard) ±0.625 ppm or better
(Option 003) ±0.03 ppm or better
Additional Equipment Required:
Power Splitter, 1 kHz to 18 GHz, 6 dB insertion loss, output
tracking: <0.25 dB, equivalent output SWR: <1.22, HP/Agilent
11667A or equivalent
Cable assy., 36", 3.5 mm (m)-(m), 50 Ohm, DC to 18 GHz, Maximum
SWR: <1.4, 2 ea., HP/Agilent 11500F or equivalent
Cable assy., 24", 3.5 mm (m)-(m), 50 Ohm, DC to 18 GHz, Maximum
SWR: <1.4, 2 ea., HP/Agilent 11500E or equivalent
Cable assy., 36", BNC(m)-(m), 50 Ohm, 2 ea.
Cable assy., 6", BNC (m)-(m), 50 Ohm, DC to 300 MHz, HP/Agilent
10502A or equivalent
Adapter, Type "N" (m) to 3.5 (m), 50 Ohms, DC to 18 GHz, Agilent
1250-1743 or equivalent
Adapter, Type "N" (f) to 3.5 (f), 50 Ohms, DC to 18 GHz, Agilent
1250-1745 or equivalent
Adapter, Type "N" (m) to 3.5 (f), 50 Ohms, DC to 18 GHz, Agilent
1250-1744 or equivalent
Adapter, Type "N" (f) to 3.5 (m), 50 Ohms, DC to 18 GHz, Agilent
1250-1750 or equivalent
Adapter, Type "N" (m) to 3.5 (f), 50 Ohms, 50 MHz, Agilent
08485-60005, no substitute (HP/Agilent 8485A standard accessory)
Adapter, BNC (m) to SMA (f), 50 Ohms, DC to 300 MHz, Agilent E9634A
or equivalent
Adapter, Type "N" (m) to BNC (f), 50 Ohms, Agilent 1250-0780 or
equivalent
Tee, BNC (f)-(m)-(f), 50 Ohms, Agilent 1250-0781 or equivalent
The average run time during testing was XX minutes.