Package: hp_8563e-ec_2yr_ver_9640-lpn_e4418_lfctr_lo_pgen_swpg_scope.mcz
Become a MET/SUPPORT Gold Member to download this package!

Details about Procedure Files

Below is a list of procedure files (.pro files) in the package.

Subprocedures and procedures files that only contain subprocedures have been excluded.

The references of the subprocedure files have been included.

AT 8563E: (2 yr) VER /9640-LPN,E4418,LFCTR,LO,SWPG

AT 8563EC: (2 yr) VER /9640-LPN,E4418,LFCTR,LO,SWPG

HP 8563E: (2 yr) VER /9640-LPN,E4418,LFCTR,LO,SWPG

Date: 2012-10-17 14:02:02

Revision: 2.5

Automated Reference: Agilent E4418B

Automated Reference: Agilent E4419B

Automated Reference: Fluke 9640A

Automated Reference: Fluke 9640A-50

Automated Reference: HP 8482A

Automated Reference: HP 8485A

Automated Reference: Local Oscillator

Automated Reference: Low Frequency Counter

Automated Reference: Pulse Generator

Automated Reference: Sweep Generator

Manual Reference: Agilent 11667B

Manual Reference: Bench Oscilloscope

Manual Reference: Directional Coupler

Model(s) Covered:

HP/Agilent 8563E/EC with options

Source(s):

Calibration Guide, Agilent Technologies 8560 E-Series and EC-Series

Spectrum Analyzers, Volume I & II, Part No. 08560-90171, May 2010

T.O. 33K3-4-3032-1, Technical Manual, Calibration Procedure For

Spectrum Analyzer 8563E(), 30 January 2002, Change 7, 30 March 2007

Compatibility:

MET/CAL 7.3 SP1 (7.3.36) or later

Flexible Standard(s) Required:

Synthesized Sweep Generator (SWPG):

Frequency Range: 10 MHz to 26.5 GHz, CW

Frequency Accuracy: Lockable to 10 MHz External Reference

Amplitude Range: -80 dBm to +16 dBm

Amplitude Accuracy: ±2 dB

Pulse Modulation: Externally modulated

Local Oscillator (LO):

Frequency Range: 2 GHz to 8.00005 GHz, CW

Frequency Accuracy: Lockable to 10 MHz External Reference

Amplitude Range: -35 dBm to +13 dBm

Amplitude Accuracy: ±2 dB

Pulse Generator (PGEN):

Frequency Range: 1 Hz to 144 kHz

Pulse Width: 200 ns to 500 ms

Amplitude Range: 0 V LOW to 5 V HIGH

Output Impedance: 50 Ohms

Low Frequency Counter (LFCTR):

Channel A

Frequency Range: 10 MHz

Frequency Accuracy: ±0.030 ppm or better (standard)

±0.625 ppm or better (Option 103)

Channel C (UUT Option 007 only)

Frequency Range: 300 MHz

Frequency Accuracy: < 0.025%

Time Interval

Range: 30 ms to 100 s

Accuracy: < 0.25% or better

Frequency Reference:

Frequency Range: Suitable for use with configured LFCTR

Frequency Accuracy: ±0.030 ppm or better (standard UUT)

±0.625 ppm or better (Option 103)

Additional Equipment Required (or equivalent):

See "Sub HP 856x Add'l Equipment Minimum Use Requirements"

for specific equipment, adapters, and cables required.

The average run times during testing were:

TAR mode: 1 hour, 42 minutes

MU mode: 3 hours, 30 minutes