Package: kyoritsu_20x7_1yr_ver_5520_55coil.mcz
Become a MET/SUPPORT Gold Member to download this package!
Procedures in Package
Click on the procedure names to find out details about the procedure files containing them.
Kyoritsu KEW SNAP 2017: (1 year) VER /5520,5500A/COIL, Revision: 1.1
Kyoritsu KEW SNAP 2027: (1 year) VER /5520,5500A/COIL, Revision: 1.1
Details about Procedure Files
Below is a list of procedure files (.pro files) in the package.
Subprocedures and procedures files that only contain subprocedures have been excluded.
The references of the subprocedure files have been included.
Kyoritsu KEW SNAP 2017: (1 year) VER /5520,5500A/COIL
Kyoritsu KEW SNAP 2027: (1 year) VER /5520,5500A/COIL
Date: 2007-03-23 14:06:41
Revision: 1.1
Automated Reference: Fluke 5500A-COIL
Automated Reference: Fluke 5520A
Model(s) Covered:
Kyoritsu KEW SNAP 2017, 2027 (True RMS)
This procedure contains the following test(s) whose Test Uncertainty Ratio
are less than 4:1.
AC CURRENT
- 20 A, 60 Hz; TUR 1.9324
- 190 A, 60 Hz; TUR 1.6575
- 400 A, 60 Hz; TUR 2.2192 (2017)
- 550 A, 60 Hz; TUR 2.2514 (2017)
- 400 A, 60 Hz; TUR 3.1313 (2027)
- 550 A, 60 Hz; TUR 2.9610 (2027)
Source:
Kyoritsu KEW SNAP 2027 Instruction Manual, Part No. 92-1281A,
Specification
Fluke Model 5500A/COIL Instruction Sheet, Part No. 600616, Aug. 1995,
Rev. 6, 12/02
Compatibility:
5500/CAL or MET/CAL 7.01 or later
Subprocedures:
None
Required Files:
None
Additional Equipment Required:
None
The average run time during testing was 8 minutes.
This procedure is intended for use with MET/CAL® calibration software;
the terms and conditions set forth in your MET/CAL license apply to this
procedure.
Due to Fluke's policy of continuously updating our products, this procedure
may contain minor differences in methods used and/or specifications to
those found in the manual or other documentation. While every effort has
been made to ensure that this procedure is accurate, Fluke cannot be held
responsible for the consequences of error or omissions found within this
procedure.