Package: rs_fsp7_1yr_ver_lpnx_4419_lfctr_lo_swpg.mcz
Become a MET/SUPPORT Gold Member to download this package!
Procedures in Package
Click on the procedure names to find out details about the procedure files containing them.
R&S FSP7: (1 yr) CAL VER /LPNX,4419,LFCTR,LO,SWPG, Revision: 1.1
Details about Procedure Files
Below is a list of procedure files (.pro files) in the package.
Subprocedures and procedures files that only contain subprocedures have been excluded.
The references of the subprocedure files have been included.
R&S FSP7: (1 yr) CAL VER /LPNX,4419,LFCTR,LO,SWPG
Date: 2011-07-01
Revision: 1.1
Automated Reference: Agilent E4418B
Automated Reference: Agilent E4419B
Automated Reference: Fluke 9640A
Automated Reference: Fluke 9640A-50
Automated Reference: Fluke 9640A-LPNX
Automated Reference: HP 8481A
Automated Reference: HP 8482A
Automated Reference: LF Counter
Automated Reference: Local Oscillator
Automated Reference: Low-Frequency Counter
Automated Reference: Sweep Generator
Manual Reference: Agilent 11667A
Model(s) Covered:
FSP7
Source(s):
R&S® Service Manual Instrument, Spectrum Analyzer, R&S® FSP3,
R&S® FSP7, R&S® FSP13, R&S® FSP30, R&S® FSP31, R&S® FSP40, Part No.
1164.4556.82-01-
R&S® FSP Spectrum Analyzer Data Sheet, Version 06.00, May 2008
Compatibility:
MET/CAL 7.3 SP1 (7.3.36) or later
Flexible Standard(s) Required:
Synthesized Sweep Generator (SWPG):
Frequency Range: 10 MHz to 10 GHz, CW
Accuracy: ±0.02% (Internal); External Reference capable
Amplitude Range: -40 dBm to +16 dBm
Resolution: 0.02 dB
SSB Phase Noise: <-80 dBc/Hz @ 50 kHz offset
Example: HP 83630B or equivalent
Local Oscillator (LO):
Frequency Range: 10 MHz to 10 GHz, CW
Accuracy: ±0.02% (Internal); External Reference capable
Amplitude Range: -40 dBm to +16 dBm
Resolution: 0.02 dB
SSB Phase Noise: <-80 dBc/Hz @ 50 kHz offset
Example: Anritsu MG3692B or equivalent
LF Counter (LFCTR):
Ch. A Frequency Range: 10 MHz
Accuracy: Based on external frequency standard
Example: Fluke PM 6690/6xx or equivalent
Frequency Standard:
Frequency Range: Suitable for use with configured LF counter
Accuracy: ±0.25 ppm or better (standard)
±0.025 ppm or better (Option FSP-B4)
Additional Equipment Required:
See "Sub FSP Add'l Equipment Minimum Use Requirements" for specific
equipment, adapters, and cables required.
The average run times during testing were:
1 hr., 45 min.