Package: rs_fsv13_1yr_ver_lpnx_4419_lo_swpg_vna.mcz
Become a MET/SUPPORT Gold Member to download this package!

Details about Procedure Files

Below is a list of procedure files (.pro files) in the package.

Subprocedures and procedures files that only contain subprocedures have been excluded.

The references of the subprocedure files have been included.

R&S FSV13: (1 yr) CAL VER /LPNX,4419,LO,SWPG,VNA

Date: 2011-08-08

Revision: 1.1

Automated Reference: Agilent E4418B

Automated Reference: Agilent E4419B

Automated Reference: Fluke 9640A

Automated Reference: Fluke 9640A-50

Automated Reference: Fluke 9640A-LPNX

Automated Reference: HP 8481A

Automated Reference: Local Oscillator

Automated Reference: Network Analyzer

Automated Reference: Sweep Generator

Manual Reference: Agilent 11667A

Model(s) Covered:

FSV13

Source(s):

R&S® Service Manual Instrument, Spectrum Analyzer, R&S® FSV3,

R&S® FSV7, R&S® FSV13, R&S® FSV30, R&S® FSV31, R&S® FSV40, Part No.

1307.9331.82-08

R&S® FSV Spectrum Analyzer Data Sheet, Version 06.00, February 2010

Compatibility:

MET/CAL 7.3 SP1 (7.3.36) or later

Flexible Standard(s) Required:

Synthesized Sweep Generator (SWPG):

Frequency Range: 10 MHz to 10 GHz, CW

Accuracy: ±0.02% (Internal); External Reference capable

Amplitude Range: -40 dBm to +16 dBm

Resolution: 0.02 dB

SSB Phase Noise: <-80 dBc/Hz @ 50 kHz offset

Example: HP 83630B or equivalent

Local Oscillator (LO):

Frequency Range: 10 MHz to 10 GHz, CW

Accuracy: ±0.02% (Internal); External Reference capable

Amplitude Range: -40 dBm to +16 dBm

Resolution: 0.02 dB

SSB Phase Noise: <-80 dBc/Hz @ 50 kHz offset

Example: Anritsu MG3692B or equivalent

Frequency Standard:

Frequency Range: Suitable for use with configured LF counter

Accuracy: ±0.25 ppm or better (standard)

±0.025 ppm or better (Option FSV-B4)

Additional Equipment Required:

See "Sub FSV Add'l Equipment Minimum Use Requirements" for specific

equipment, adapters, and cables required.

The average run times during testing were:

1 hr., 45 min.