Package: tek_afg3011_1yr_ver_nrvs_rsa3000_tds5104b_lfctr_dmm.mcz
Become a MET/SUPPORT Gold Member to download this package!
Procedures in Package
Click on the procedure names to find out details about the procedure files containing them.
Tek AFG3011:(1 yr) VER /NRVS,RSA3000,TDS5104B,LFCTR,DMM, Revision: 1.1
Details about Procedure Files
Below is a list of procedure files (.pro files) in the package.
Subprocedures and procedures files that only contain subprocedures have been excluded.
The references of the subprocedure files have been included.
Tek AFG3011:(1 yr) VER /NRVS,RSA3000,TDS5104B,LFCTR,DMM
Date: 2010-06-30 09:13:27
Revision: 1.1
Automated Reference: Digital Multimeter
Automated Reference: Low-Frequency Counter
Models covered:
AFG 3011
Source(s):
AFG3000 Series Arbitrary/Function Generators Service Manual
071-1640-05
Compatibility:
MET/CAL 7.20 SP3 (7.20Z) or later
This procedure contains the following tests whose Test Uncertainty Ratio
are less than 4:1 based on Rohde & Schwarz NRVS and NRV-Z5 diode sensor
specifications.
AC Flatness:
500 kHZ Relative to 100 kHz TUR 2.5000
1 MHZ Relative to 100 kHz TUR 2.5000
Flexible Standards Required:
LF Counter (LFCTR):
Ch. A Frequency Range: 10 MHz
Accuracy: 0.01 ppm or better
Example: Agilent 53132A or equivalent
Digital Multimeter (DMM)
AC volts: 0.1% accuracy or better
DC volts: 50 ppm, resolution 100¦ÌV accuracyor better
Resistance: ¡À 0.05 Ohm accuracy or better
Example: Agilent 3458A or equivalent
User configurated standards Required:
Power Meter/Sensor:
100 kHz to 250 MHz, 1 ¦ÌW to 100 mW(-30 dBm to +20 dBm)
Accuracy: 0.02 dB, resolution: 0.01 dB
Standard Used: Rohde & Schwarz NRVS power meter
Rohde & Schwarz NRV-Z5 power sensor
Power Sensor:
100 kHz to 250 MHz, 1 ¦ÌW to 100 mW (¨C30 dBm to +20 dBm)
Standard Used: Rohde & Schwarz NRV-Z5
Oscillioscope:
1 GHz Bandwidth, 50 Ohm input termination
Standard Used: Tektronix TDS5104B
Spectrum Analyzer:
20 kHz to 1.25 GHz
Standard Used: Tektronix RSA3000 series
Additional Accessory Required:
Cable, 50 Ohm, BNC(m)-(m), Pomona 2249-C-36
Adapter, BNC (f) to Type "N" (m), 50 Ohm
Adapter, BNC (f) to Dual-Banana plug
50 Ohm terminator
10X (50 Ohm) attenuator