Package: tek_tps2000_cal_rs232_5520a_sc600.mcz
Become a MET/SUPPORT Gold Member to download this package!
Procedures in Package
Click on the procedure names to find out details about the procedure files containing them.
Tektronix TPS 2012: (1 year) CAL VER RS-232 /5520+SC600, Revision: 1.2
Tektronix TPS 2014: (1 year) CAL VER RS-232 /5520+SC600, Revision: 1.2
Tektronix TPS 2024: (1 year) CAL VER RS-232 /5520+SC600, Revision: 1.2
Tektronix TPS 2012: CAL ADJ RS-232 /5520+SC600, Revision: 1.1
Tektronix TPS 2014: CAL ADJ RS-232 /5520+SC600, Revision: 1.1
Tektronix TPS 2024: CAL ADJ RS-232 /5520+SC600, Revision: 1.1
Details about Procedure Files
Below is a list of procedure files (.pro files) in the package.
Subprocedures and procedures files that only contain subprocedures have been excluded.
The references of the subprocedure files have been included.
Tektronix TPS 2012: (1 year) CAL VER RS-232 /5520+SC600
Date: 2009-07-01 14:51:04
Revision: 1.2
Automated Reference: Fluke 5520A
Tektronix TPS 2014: (1 year) CAL VER RS-232 /5520+SC600
Tektronix TPS 2024: (1 year) CAL VER RS-232 /5520+SC600
Date: 2009-07-01 14:51:07
Revision: 1.2
Automated Reference: Fluke 5520A
Models covered:
TPS 2014, TPS 2024
Source(s):
TPS2000 Series Digital Storage Oscilloscopes
Service Manual, PN 071-1465-01
Compatibility:
MET/CAL or 5500/CAL 7.20 SP1 (7.20x) or later
Additional Equipment Required:
Power Splitter, 1 kHz to 500 MHz, 6 dB insertion loss,
output tracking: <0.25 dB, equivalent output
SWR: <1.22, HP/Agilent 11667A or equivalent
N(f) all ports
N(m) to BNC(f) adapter, 3 sets
50 Ohm feed through terminator, 2 sets
50 Ohm BNC(m)-(m) cable, 10 inch long, 2 sets
Tektronix TPS 2012: CAL ADJ RS-232 /5520+SC600
Tektronix TPS 2014: CAL ADJ RS-232 /5520+SC600
Tektronix TPS 2024: CAL ADJ RS-232 /5520+SC600
Date: 2009-07-01 14:51:10
Revision: 1.1
Automated Reference: Fluke 5520A
Models covered:
TPS 2012, TPS 2014 and TPS 2024
Source(s):
TPS2000 Series Digital Storage Oscilloscopes
Service Manual, PN 071-1465-01
Compatibility:
MET/CAL or 5500/CAL 7.20 SP1 (7.20x) or later
Additional Equipment Required:
BNC T adapter (f-f-f), 1 set
BNC T adapter (f-m-f), 2 sets
50 Ohm BNC(m)-(m) cable, 10 inch long, 4 sets
50 Ohm feed through terminator, 1 set
Models covered:
TPS 2012
Source(s):
TPS2000 Series Digital Storage Oscilloscopes
Service Manual, PN 071-1465-01
Compatibility:
MET/CAL or 5500/CAL 7.20 SP1 (7.20x) or later
Additional Equipment Required:
Power Splitter, 1 kHz to 500 MHz, 6 dB insertion loss,
output tracking: <0.25 dB, equivalent output
SWR: <1.22, HP/Agilent 11667A or equivalent
N(f) all ports
N(m) to BNC(f) adapter, 3 sets
50 Ohm feed through terminator, 2 sets
50 Ohm BNC(m)-(m) cable, 10 inch long, 2 sets