Package: tek_tps2000_cal_rs232_9500.mcz
Become a MET/SUPPORT Gold Member to download this package!

Details about Procedure Files

Below is a list of procedure files (.pro files) in the package.

Subprocedures and procedures files that only contain subprocedures have been excluded.

The references of the subprocedure files have been included.

Tektronix TPS 2012: (1 year) CAL VER RS-232 /9500+1Hd

Date: 2009-07-01 15:17:03

Revision: 1.2

Automated Reference: Datron 9500

Automated Reference: Datron 9510

Models covered:

TPS 2012

Source(s):

TPS2000 Series Digital Storage Oscilloscopes

Service Manual, PN 071-1465-01

Compatibility:

MET/CAL 7.20 SP1 (7.20x) or later

Additional Equipment Required:

Power Splitter, 1 kHz to 500 MHz, 6 dB insertion loss,

output tracking: <0.25 dB, equivalent output

SWR: <1.22, HP/Agilent 11667A or equivalent

N(f) all ports

N(m) to BNC(f) adapter, 3 sets

50 Ohm feed through terminator, 2 sets

50 Ohm BNC(m)-(m) cable, 10 inch long, 2 sets

Tektronix TPS 2012: (1 year) CAL VER RS-232 /9500+3Hd

Date: 2009-07-01 15:17:06

Revision: 1.1

Automated Reference: Datron 9500

Automated Reference: Datron 9510

Models covered:

TPS 2012

Source(s):

TPS2000 Series Digital Storage Oscilloscopes

Service Manual, PN 071-1465-01

Compatibility:

MET/CAL 7.20 SP1 (7.20x) or later

Additional Equipment Required (Only used in lieu of 9500 dual sine mode):

Power Splitter, 1 kHz to 500 MHz, 6 dB insertion loss,

output tracking: <0.25 dB, equivalent output

SWR: <1.22, HP/Agilent 11667A or equivalent

N(f) all ports

N(m) to BNC(f) adapter, 3 sets

50 Ohm feed through terminator, 2 sets

50 Ohm BNC(m)-(m) cable, 10 inch long, 2 sets

Tektronix TPS 2014: (1 year) CAL VER RS-232 /9500+1Hd

Tektronix TPS 2024: (1 year) CAL VER RS-232 /9500+1Hd

Date: 2009-07-01 15:17:08

Revision: 1.2

Automated Reference: Datron 9500

Automated Reference: Datron 9510

Models covered:

TPS 2014, TPS 2024

Source(s):

TPS2000 Series Digital Storage Oscilloscopes

Service Manual, PN 071-1465-01

Compatibility:

MET/CAL 7.20 SP1 (7.20x) or later

Additional Equipment Required:

Power Splitter, 1 kHz to 500 MHz, 6 dB insertion loss,

output tracking: <0.25 dB, equivalent output

SWR: <1.22, HP/Agilent 11667A or equivalent

N(f) all ports

N(m) to BNC(f) adapter, 3 sets

50 Ohm feed through terminator, 2 sets

50 Ohm BNC(m)-(m) cable, 10 inch long, 2 sets

Tektronix TPS 2014: (1 year) CAL VER RS-232 /9500+5Hd

Tektronix TPS 2024: (1 year) CAL VER RS-232 /9500+5Hd

Date: 2009-07-01 15:17:11

Revision: 1.2

Automated Reference: Datron 9500

Automated Reference: Datron 9510

Models covered:

TPS 2014, TPS 2024

Source(s):

TPS2000 Series Digital Storage Oscilloscopes

Service Manual, PN 071-1465-01

Compatibility:

MET/CAL 7.20 SP1 (7.20x) or later

Additional Equipment Required (Only used in lieu of 9500 dual sine mode):

Power Splitter, 1 kHz to 500 MHz, 6 dB insertion loss,

output tracking: <0.25 dB, equivalent output

SWR: <1.22, HP/Agilent 11667A or equivalent

N(f) all ports

N(m) to BNC(f) adapter, 3 sets

50 Ohm feed through terminator, 2 sets

50 Ohm BNC(m)-(m) cable, 10 inch long, 2 sets

Tektronix TPS 2012: CAL ADJ RS-232 /9500+1Hd

Tektronix TPS 2014: CAL ADJ RS-232 /9500+1Hd

Tektronix TPS 2024: CAL ADJ RS-232 /9500+1Hd

Date: 2009-07-01 15:17:14

Revision: 1.1

Automated Reference: Datron 9500

Automated Reference: Datron 9510

Models covered:

TPS 2012, TPS 2014 and TPS 2024

Source(s):

TPS2000 Series Digital Storage Oscilloscopes

Service Manual, PN 071-1465-01

Compatibility:

MET/CAL 7.20 SP1 (7.20x) or later

Additional Equipment Required:

BNC T adapter (f-f-f), 1 set

BNC T adapter (f-m-f), 2 sets

50 Ohm BNC(m)-(m) cable, 10 inch long, 4 sets