Impulse 6000D/7000DP Plug-In

The Ansur Impulse 6000D/7000DP Plug-In is an add-on module for the Ansur Test Automation software application. The plug-in is used in conjunction with the Impulse 6000D/7000DP Defibrillator Analyzer to provide test automation capabilities using the Ansur PC software.

Introduction

This read me file contains the latest information for Fluke Biomedical's Ansur Impulse 6000D/7000DP Plug-In.

USB Driver and Cable Requirements

USB installation for Impulse 6000D/7000DP is installed automatically with Ansur executive 2.5.0 and higher.

Use a standard USB printer cable to connect the Impulse 7000 to your PC.

History

This chapter describes the changes made between each new released version.

Release 1.1.4

• Defib Pulse Repition test changed for Norwegian language setting.

Release 1.1.3

• Implemented the External Load Selection.

Release 1.1.2

• Dynamic graph scaling is implemented in the waveform.

Release 1.1.1

• The graph scaling is modified for the FW version greater than v1.02

Release 1.1.0

• Implemented the display of Serial Number, Firmware version and Equipment of the instrument in print report.
• Implemented Norwegian language settings for communication error of waveform tests and opening/saving templates.

Release 1.0.0

• V1.0.0 is the first release of the Impulse 6000D/7000DP plug-in.

Language Changes

This chapter describes the changes made to the language file in each new version.
The list includes only versions where the language file was changed.

Release 1.0.0

• Initial revision.