Page 41 - Fluke Accessory Catalog

RS500 Probe Accessories Replacement Set
For VPS510 Series Probes
• CATII300V
• 1x hook clip (black)
• 1x ground lead with mini alligator clip (black)
• 2x insulation sleeves for probe’s ground contact (black)
• 1x BNC to probe tip adapter (black)
• CATII30V
• 2x ground browsers (black)
• 1x insulated mini screwdriver, for probe adjustment purposes
i5s AC Current Clamp
• 0.01Ato5A
• Range 400 mV/A
• Basic accuracy % reading: 1 %
• Usable frequency range: 40Hzto5kHz
TP920 Test Probe
Adapter Kit
Suited for STL120 Test Leads (Not compatible with STL120-III), TL71 Test Leads, TL75 Test Leads and TL76 Test Leads
The set consists of:
• IC test tip adapters for prob- ing closely spaced test points, such as the pins of integrated circuits, without shorting adja- cent leads. Maximum current handling 3A
• Extended probe tips allow testing of hard to reach points. Maximum current handling 3A
• Medium size alligator clips have maximum jaw opening of 7.6 mm (0.30 in)
• Rated for 5 A max
TAS 90 Shielded Test lead
Accessory Set
• Set 4 mm adapters for Banana plug (1x red, 1x grey, 2x black)
• Set of back probe pins for Banana plug (1x red, 1x grey, 2x black)
• CATII30V
• Rated for 1A max
PM9091 Set of 3x Coaxial Cables with BNC connectors • Length: 1.5m each
• Impedance: 50 ohm
• Color: 1xRed, 1xBlack, 1x3x
Grey
• Max signal voltage: 300 V rms
• Max voltage to ground: 600 V rms CAT III per IEC/ EN61010-031
PM9092 Set of Coaxial cables with BNC connectors • Length: 0.5 m each
• Impedance: 50 ohm
• Color: 1x red, 1x black, 1x grey • Max signal voltage: 300 V rms
• Max voltage to ground: 600 V rms CAT III per IEC/ EN61010-031
PM9093 Adapter BNC (male) to Dual BNC (female) in T model (6)
• Color: 2x black
• Max signal voltage: 300 V rms CAT III per IEC/EN61010
• Max voltage to ground: 600 V rms CAT III per IEC/EN61010
PM9081 Adapter BNC (female) to Dual Banana Jack
• Color: 2x red, 2x black
• Max signal voltage: 600Vrms CAT III per IEC/EN61010
• Max voltage to ground: CAT III 600Vrms/CATII1000Vper IEC/EN61010
PM9082 Adapter BNC (male) to Dual Banana Jack • Color: 2x red, 2x black
• Max signal voltage: CAT III 600 Vrms per IEC/EN61010
• Max voltage to ground: CAT III 600 Vrms /CAT II 1000 V per IEC/EN61010
BB120 Adapter BNC (female) to Shielded Banana Jack
• Setof2
• Max signal voltage: 300 Vrms CAT III per IEC/EN61010
• Max voltage to ground: 600 V CAT III per IEC/EN61010
TRM50 Coaxial Feed- through BNC male to BNC female Cable Terminator • Setof2
• Specification
• Impedance: 50 ohm
• Max voltage over ground: CAT III 1000 V
• Max power 1W
BHT190 Bus Health Test
Break-out Adapter Set
• Board with M12 connectors (male to female, 5 pins)
• DB-9 connectors (male to female, 9 pins + shield)
• RJ-45 connector, with short
patch cable providing male to
female interconnection (8 pins) 41
CS20MA Current Shunt for AC and DC measurements on 4 to 20mA control loops • Sensitivity: 10mV/mA
• Shunt resistance: 10 ohm
• Bandwidth: > 10 kHz
• Max voltage to ground: CAT III 30 Vrms per EN/IEC 61010
MA190 Medical Applica- tions Accessory Kit
• 1x 50 ohm BNC feed through
terminator
• 1x 50 ohm BNC feed through terminator with 10:1 signal attenuator
• 1x 1 ohm current shunt in BNC feed through
• 1x BNC terminated coax cable • 1x Single piece insulated BNC
(female) to 4mm Banana plug adapter
• 2x Pieces dual 4mm Banana receptacles (1x red, 1x black)
EBC290 External Charger
For Fluke 190 Series II ScopeMeter® Oscilloscope
• Charging time (BP291): five hours, giving an operating time of up to seven hours
• DC input voltage: 15 V to 23 V, 714 mA nom. (dc input from BC190: 17.8 V / 0.84 A max)
For more information, go to www.fluke.com/accessories
Portable oscilloscopes