Page 45 - Fluke Accessory Catalog

TLK281 SureGripTM Automotive Test Lead Kit This complete set of test and measurement accessories is designed for automotive spe- cialists. Sharp stainless steel probes can be used to contact the wire conductor or pinpoint tests on a circuit or relay while the large-jaw alligator clips ensure a good ground on the engine or connection to battery terminals. Also includes sili- cone-insulated test leads and a convenient case. Rated to 60 V dc. Kit includes:
• TP81 Insulation Piercing Clip Set
• TL224 SureGripTM Insulated Test Leads
• TP220 SureGripTM Industrial Test Probes
• AC220 SureGripTM Alligator Clips
• AC285 SureGripTM Alligator Clips
• Soft case
TLK282 SureGripTM Deluxe Automotive Test Lead Kit This kit includes everything
in the TLK281 Kit plus a few extras. The back probe pins slide past weather-pack con- nectors on fuel injectors, TPS, and MAP sensors. A hook probe with plunger actuation allows quick connection to pins or exposed conductors.
Kit includes:
• TP81 Insulation Piercing Clip Set
• TP40 Automotive Back Probe Pins (five)
• TL224 SureGripTM Insulated Test Leads
• TP220 SureGripTM Industrial Test Probes
• AC220 SureGripTM Alligator Clips
• AC285 SureGripTM Alligator Clips
• AC280 SureGripTM Hook Clips • Soft case
• Ratedto60Vdc
TP40 Automotive
Back Probe Pins
Flexible and formable 31.75 mm (1.25 in) pins provide an easy connection past weather-pack seals to connector conductors. These five pins are a must- have for fuel injectors, TPS, and MAP sensors, as well as for any under-hood or under-vehicle connector with weather-pack seals.
• 4 mm (0.16 in) banana jack accepts digital multimeter and banana jack leads
• Easily connects to modular leads such as the TL224
• Ratedto60Vdc
TP81/TP82 Insulation Piercing Clip Set
Two stainless steel probes (red, black) pierce insulation on 14, 16 and 18 gauge wire. Needle depth can be controlled to minimize insulation damage. Essential for use under hood
or under dash. Can be used on fuel injectors or sensors while providing complete insulation
to grounding. Probe connects to a banana jack that accepts all digital multimeter and banana jack leads (such as the TL224 SureGripTM Insulated Test Leads).
•
• •
TP1 has non-rotating
4 mm (0.16 in) banana jack to prevent leads from tangling
Ratedto60Vdc
TP82 is for use with test leads with 2 mm probes
45
TP88 Rigid Back
Probe Pins
Better than a test probe alone, these rigid back probe pins easily pass between a weather- pack seal and wire. A sharp point ensures good contact to the electrical connector, and insulation protects the pin from shorting to other wires.
• Slides onto 2 mm (0.08 in) test probes
• Probe length: 51 mm (2 in) • Ratedto60Vdc
RPM80 Inductive Pick-Up/External Trigger • Provides RPM measurement
capability when clipped on spark plug wire
• For use with Fluke 88 Series and 78 Series DMMs
TL82
TP88
RPM80
For more information, go to www.fluke.com/auto-accy
Automotive