Page 51 - Fluke Accessory Catalog

Process tools
700PTPK Pneumatic
Test Kit
• Combine with any Fluke 700G
Series Gauge, 1,000 psi
(69 bar) or less, to make a complete pressure testing kit
• Generate pressure up to 600 psi, 40 bar with the 700PTP-1 test pump
• Connect the 700G Series gauge directly to the included PTP-1 hand pump
700HTPK Hydraulic
Test Kit
• Combine with any Fluke-700G
Series Gauge, 1,000 psi (69 bar) range or greater, to make a complete pressure testing kit
• Generate pressure up to 10,000 psi, 690 bar with the included 700HTP-2 test pump
• Connect the 700G Series gauge directly to the HTP-2 hand pump
700LTP-1 Low Pressure Test Pump
Hand operated pressure pump designed to generate either vacuum to -13 psi/-.90 bar or pressures to 100 psi/6.9 bar. Ideal for low pressure applica- tions requiring accurate low pressure testing.
71XTrap Liquid and
Dirt Trap
The 71XTrap is designed to work with pressure up to 500 psi and mitigates the chance of fluid damage in at-risk applications. Designed to work with the 718 and 719PRO.
700ILF In-line Filter
The Fluke 700ILF can be used to isolate the calibrator from incidental contact with fluids. Particularly useful with the 718 calibrator to help keep moisture or oils from contaminating the on-board pump.
700PTP-1 Pneumatic
Test Pump
The Fluke 700PTP is a handheld pressure pump designed
to generate either vacuum to -11.6 psi/-0.8 bar or pressure
to 600 psi/40 bar.
700HTP-2 Hydraulic
Test Pump
The Fluke 700HTP is designed to generate pressures up to 10,000 psi/700 bar. Use the Fluke 700PRV adjustable relief valves to limit pressures from 1360 psi to 5450 psi.
700HTH-1 Hydraulic Test Hose
The 700HTH is a 10,000 psi, 700 bar test hose that connects to a calibration unit under test from a Fluke 700HTP hydraulic test pump.
700PMP Pressure Pump
The 700PMP is a hand-operated pressure pump to provide pres- sures up to 150 psi/1000 kPa. Output fitting is 1/8 FNPT.
700-IV Current Shunt
• Conversionfactor:10mV=1mA • Accuracy (% of input, one-
year): 0.025 %
• Input current: 0 mA to 55 mA
• Input resistance: 250 Ω nominal
• Output resistance: 10 Ω nominal
• Accuracy specification applies from+18°Cand28°Cto50°C
• Maximum input voltage: 30 V dc 71X, Hose Kit
The Fluke 71X Hose Kit is a compatible with the 717, 718 and 719pro calibrators 100 psi and below.
The kit contains three trans- lucent hoses one meter long and one 1/8 to 1/4 NPT female- female adapter.
700PRV Pressure Relief Valve Kit
The Fluke 700PRV consists of two relief valves (1360 and 5450 psi) to be used with the 700HTP Hydraulic Test Pump. These relief valves will protect the most commonly used Fluke pressure modules from damage due to accidental over-pressur- ization. 1/4 BSP male parallel thread to fit Fluke 700HTP.
51
For more information, go to www.fluke.com/accessories