Page 31 - Pressure Calibration Brochure

ACCESSORIES

700HTP-2 Hydraulic Test Pump
P5543 Angle Adapter

The 700HTP-2 is designed to gener- To calibrate gauges with the pressure
ate pressures up to10,000 psi/700 connection on the rear (for example,
bar. Use the Fluke 700PRV-1 adjust- panel mount gauges) in their correct

able relief valves to limit pressures
operating position, an angle adaptor
from 1360 psi to 5450 psi. Use the 700HTH-1 should be used. The angle adapter uses the stan-
test hose to connect from the pump to the device dard gauge adapters and positions the gauges at
under test.
90o. The maximum working pressure of this unit is
10,000 psi (700 bar).
700PTP-1 Pneumatic Test Pump
The 700PTP-1 is a handheld pres- P5544 Two Gauge Stand

sure pump designed to generate This adapter mounts directly to the
either vacuum to -11.6 psi/-0.8 bar test port of the calibrator and allows
or pressure to 600 psi/40 bar.
for the calibration of two instruments
at the same time, or the connection of

700LTP-1 Low Pressure Test Pump
a reference test instrument. Maximum working pres-
Hand operated pressure pump sure is 10,000 psi (700 bar).
designed to generate either vacuum
P5551 Pointer Remover/Punch
to -13 psi/-.90 bar or pressures to
100 psi/6.9 bar. Ideal for low pres-
This tool is designed to quickly
sure applications requiring accurate low pressure.
remove and consistently refit the
pointer of a pressure gauge.

BP7235 NiMH Battery
Spare battery for 74X calibrators. 700PTPK2 Premium Pneumatic
Have the power to easily run the Test Pump Kit Adds premium hose
kits to the standard 700PTPK. Includes
calibrator for a full day’s work.
“finger tight” no tools required con-
nectors to connect both a gauge and
BP7240 Li-ion Battery
connection to a transmitter.
Spare battery for 75X calibrators.
Have the power to easily run the 700HTPK2 Premium Hydraulic Test

calibrator for a full day’s work.
Pump Kit Adds premium hose kits
to the standard 700HTPK. Includes
“finger tight” no tools required con-
700ILF In Line Filter
Trap fine particles from atmospheric nectors to connect both a gauge and
air, compressed air, and instrument connection to a transmitter.

air. It is used with the Fluke 713, 700TTH 5K and 700TTH 10K
717, or 718 Pressure Calibrators.
Maximum working pressure 100 psi.
Premium Transmitter Test hose
kits. 5,000 and 10,000 psi models.
Included 1/8” NPT connection for
Fluke 71XTrap Liquid and Dirt
Trap for 718 and 719Pro
permanent mount to a calibrator or
test pump and no tools required 1/4” NPT male
Liquid and Dirt Trap for 718, 719 connector for connection to a transmitter.
and 719Pro. Protects calibrator from
accidental exposure to fluid and dirt.
700M20TH
Standard with 719Pro, optional with 718 and 719. Premium M20 Test hose kit. 5,000
Working pressure to 300 psi.
psi rating. Includes 1/8” NPT con-
nection for permanent mount to a
Fluke 71X, Hose Kit Accessory
calibrator or test pump and male no
The Fluke 71X Hose Kit is compatible tools required connector for connection to Female
with the 717 and 718 calibrators M20 connections.
100 PSI and below. The translu-

cent accessory hoses allow the
700MTH
technician to easily identify if there is oil or other Premium Metric Test hose kit.
contaminants in the hose before they get into the 5,000 psi rating. Includes 1/8” NPT

calibrator. The kit contains three translucent hoses, connection for permanent mount to a
one meter long, with easy-to-connect push fit con- calibrator or test pump and no tools
nectors to the calibrator and the device under test, required male connector for connection to 1/4”

and one 1/8” to 1/4” NPT female-female adapter.
female metric/BSP.

31