Package: agilent_e4402b_1yr_ver_9640-lpn_4418_hfsg_lfctr.mcz
Become a MET/SUPPORT Gold Member to download this package!

Details about Procedure Files

Below is a list of procedure files (.pro files) in the package.

Subprocedures and procedures files that only contain subprocedures have been excluded.

The references of the subprocedure files have been included.

AT E4402B: (1 yr) CAL VER /9640-LPN,4418,HFSG,LFCTR

HP E4402B: (1 yr) CAL VER /9640-LPN,4418,HFSG,LFCTR

Date: 2012-12-06 17:01:55

Revision: 1.3

Automated Reference: Agilent E4418B

Automated Reference: Agilent E4419B

Automated Reference: Fluke 9640A

Automated Reference: Fluke 9640A-50

Automated Reference: High Frequency Sig Gen

Automated Reference: HP 8482A

Automated Reference: Low Frequency Counter

Manual Reference: Agilent 86205A

Model(s) Covered:



Calibration Guide, Agilent Technologies ESA Spectrum Analyzers,

Manufacturing Part No. E4401-90493, March 2005


MET/CAL 7.20 SP3 (7.20Z) or later

Flexible Standard(s) Required:

High Frequency Signal Generator (HFSG):

Frequency Range: 10 MHz to 3 GHz, CW

Frequency Accuracy: ±0.02% (Internal); External Reference capable

Amplitude Range: -35 dBm to +16 dBm

Amplitude Accuracy: ±2 dB

SSB Phase Noise: <-120 dBc/Hz @ 20 kHz offset

Example: Anritsu MG3690() or equivalent

Low Frequency Counter (LFCTR):

Ch. A Frequency Range: 10 MHz

Ch. A Frequency Accuracy: Based on external frequency standard

Example: Fluke PM 6690/6xx or equivalent

Frequency Standard:

Frequency Range: Suitable for use with configured LF counter

Frequency Accuracy: ±0.025 ppm or better (Option 1D5)

±0.625 ppm or better (standard)

Additional Equipment Required:

Splitter, Power, Range: 50 MHz to 3 GHz, Type N, 50 Ohms,

Insertion Loss: 6 dB, Port Tracking: <0.25 dB, Equivalent Output

SWR: <1.22; Agilent® 11667A or equivalent

Bridge, Directional, 5 MHz to 3 GHz, 50 Ohms, Directivity: >40 dB,

Coupling Factor: 16 dB, Insertion Loss: 2 dB max; Agilent 86205A

or equivalent

Filter, Low Pass, 300 MHz, 50 Ohms, Rejection at >435 MHz: >45 dB;

Agilent 0955-0455 or equivalent

Filter, Low Pass, 1 GHz, 50 Ohms, Rejection at >2 GHz: >60 dB;

Agilent 0955-0487 or equivalent

The average run times during testing were:

2 hr., 31 min. (TAR mode)