Page 46 - Fluke Test Tools Catalog

Fluke 717, 718, 719 and 719PRO Pressure Calibrators
Pressure modules
Fluke 750P Series Pressure Modules
48 pressure modules covers pres- sure calibrations from 0 to 1 in H20 to 10000 psi 2.5 mBar to 690 bar).
• 0.025 % reference uncertainty
• 6-monthand1-yearspecifications
• Temperature compensated
0 °C to 50 °C
• Digital communication to calibrators,
no analog losses or errors
• Broad selection of ranges
• Gage, differential, dual range,
absolute and vacuum measurement models
Fluke Process Calibrators in this
catalog displaying the Pressure Enabled Enabled symbol display readings from
the 750P Series Pressure Modules.
Recommended accessories
Pressure
700ILF
In-Line Filter
See page 68
700HTP-2
Hydraulic Test Pump
See page 68
700LTP-1
Low Pressure Test Pump See page 68
C116
Large Soft Case
See page 63
Fluke 718
Fluke 717
Fluke 719Pro
Pressure Enabled
Fluke 719 and 719PRO Electric Pressure Calibrators
• Electric pump enables one-handed pressure pumping and makes pressure calibration quicker and easier
• Best in class 0.025 % pressure measurement accuracy
• Programmable pump limit settings can eliminate over-
pressurization—set ‘pump to’ pressure values
• 719: Two ranges, 30 psi and 100 psi
• 719PRO: Three ranges 30, 150 and 300 psi
• 719PRO: Precision temperature measurement with
optional 720RTD Probe
Fluke 718 Pressure Calibrators
• 1, 30, 100 and 300 psi ranges available
• Pump to 300 psi, 20 bar with internal pump (718-300G) • 718-1G includes special low volume pump and high
measurement resolution for low pressure calibration
Fluke 717 Pressure Calibrators
• Measure up to 10,000 psi/690 bar sensor (10000G model) • Compatible with non-corrosive gases
and liquids on 500 psi and higher ranges
718 and 719
• Precision vernier for fine pressure adjustment
• Variable release rate bleed valve for controlled pressure
release
Models
Range
Resolution
Comment
717-1G
+/- 1 psi, 27.5 in H20, (-7 - +7 kPa)
+0.0001 psi, 0.0001 kPa, 0.001 inH2O
Dry air only. Fluke 718 includes on board pump
718-1G
717-15G
-12 to 15 psi, -83 to 103 kPa
0.001 ps1, 0.01 kPa
Dry air only
717-30G
-12 to + 30 psi, (-83 to 207 kPa)
0.001 psi, 0.01 kPa
Dry air only. Fluke 718 and Fluke 719 include on board pump
718-30G* 719-30G and 719Pro-30G
717-100G
-12 to + 100 psi, (-83 to 690 kPa)
0.01 psi, 0.01 kPa
Dry air only. Fluke 718 includes on board pump.
718-100G*
719-100G
-12 to +300 psi, (-83 to +2070 kPa)
0.01 psi, 0.01 kPa
Fluke 719 dries air only and includes on board pump
719Pro 150G
-12 to 150 psi
0.01 psi, 0.01 kPa
Fluke 719Pro dry air only and includes on board pump
717-300G
-12 to +300 psi, (-83 to +2070 kPa)
0.01 psi, 0.1 kPa
Dry air only. Fluke 718 and Fluke 719Pro include on board pump.
718-300G* and 719Pro 300G
717-500G
0-500 psi, 0-3450 kPa
0.01 psi, 0.1 kPa
Compatible with non-corrosive gases and fluids
717-1000G
0-1000 psi, 0-6900 kPa
0.01 psi, 0.1 kPa
Compatible with non-corrosive gases and fluids
717-1500G
0-1500 psi, 0-10342 kPa
0.1 psi, 1 kPa
Compatible with non-corrosive gases and fluids
717-3000G
0-3000 psi, 0-20700 kPa
0.1 psi, 1 kPa
Compatible with non-corrosive gases and fluids
717-5000G
0-5000 psi, 0-34500 kPa
0.1 psi, 1 kPa
Compatible with non-corrosive gases and fluids
717-10000G
0-10000 psi, 0-69000 kPa
1 psi, 1 kPa
Compatible with non-corrosive gases and fluids
Pressure accuracy
0.035 % of range, 1 year. 0.025 % for 6 months, 717 and 718-1G: 0.05 % 6 months, 1 year, 718 and 717-300G 0.035 % 6 months, 0.05 % 1 year
mA measurement
0-24 mA range
0.001 mA resolution
Accuracy: ± 0.015 % + 1 count
Loop power
24 V dc
Accuracy: ± 10 %
Included accessories
Models
Test leads, alligator clips, holster, test hose (719), one 9 V alkaline battery (two 9 V bat- teries in 718 and 719), 4 AA batteries in the 719PRO and safety sheet.
FLUKE-719PRO 30G Electric Pressure Calibrator
FLUKE-717 15G Pressure Calibrator
FLUKE-719PRO 150G Electric Pressure Calibrator
FLUKE-717 30G Pressure Calibrator
FLUKE-719PRO 300G Electric Pressure Calibrator
FLUKE-717 100G Pressure Calibrator
FLUKE-719 30G Electric Pressure Calibrator
FLUKE-717 300G Pressure Calibrator
FLUKE-719-100G Electric Pressure Calibrator
FLUKE-717 500G Pressure Calibrator
FLUKE-718 1G Pressure Calibrator
FLUKE-717 1000G Pressure Calibrator
FLUKE-718 30US Pressure Calibrator
FLUKE-717 1500G Pressure Calibrator
FLUKE-718 100US Pressure Calibrator
FLUKE-717 3000G Pressure Calibrator
FLUKE-718 300G Pressure Calibrator
FLUKE-717 5000G Pressure Calibrator
FLUKE-717 1G Pressure Calibrator
FLUKE-717 10000G Pressure Calibrator
44
717, 718 and 719 common features
• Pressure switch test makes a difficult task easy, captures set, reset and deadband values of a pressure switch
• 717, 718 and 719 measure pressure to 0.025 % of full scale
• Measure mA with 0.015 % accuracy, while sourcing 24 V loop power
Specifications
*Intrinsically safe models available, see page 45. Warranty: Three-year on calibrator, one-year on pump. Ordering information
For a full list of Fluke 700 Pressure Calibrators, visit www.fluke.com/pressure.
Process Calibration Tools For more information, go to www.fluke.com/pressure
Check price and availability at
www.fluke.com/wtb