Page 22 - Fluke Accessory Catalog

i400
i400s
i200
i200s
i800
22
i800 AC Current Clamp
This ac current clamp is designed to extend the current measuring capability of a digital multimeter to 800 A ac. It is compatible with a digital mul- timeter that accepts shrouded
4 mm (0.16 in) banana plugs and has an ac milliamp range.
• Current range: 100 mA to 800Armsac
• Frequency range: 30 Hz to 10 kHz (-3 dB)
• Safety rating: CAT III 600 V rms
i400 AC Current Clamp
This high-safety current clamp for digital multimeters is a single range 400 A ac clamp that is designed to offer max- imum utility in a very compact shape. It is compatible with most digital multimeters or
any other current measure- ment device that accepts 4 mm (0.16 in) shrouded banana plugs and has an ac milliamp range. The division ratio is 1000:1.
• Current range: 1 A to 400 A ac
• Frequency range: 5 kHz to
20 kHz (-3 dB)
• Safety rating: CAT IV 600 V, CAT III 1000 V
i400s AC Current Clamp
This high-safety compact cur- rent clamp with BNC output is a companion to a ScopeMeter or power quality meter to measure up to 400 A ac.
• Current range: 0.5 A to 400 A ac
• Frequency range: 5 Hz to 10 kHz (-3 dB)
• Optional PM9081/001 Dual Banana Plug Male to Female BNC Adapter is available for digital multimeters
• Safety rating: CAT IV 600 V, CAT III 1000 V
i200 AC Current Clamp
This small-sized single-range current clamp features safety- shrouded 4 mm (0.16 in) banana plugs. It is compatible with most digital multimeters or other cur- rent measurement device that accepts shrouded 4 mm (0.16 in) banana plugs and has an ac milliamp range.
• Current range: 1 A to 200 A ac • Frequency range: 40 Hz to
40 kHz
• Safety rating: CAT III 600 V
i200s AC Current Clamp
This small-sized dual-range current clamp offers voltage output using a safety-insu- lated BNC connector. A dual banana-to-BNC adapter allows the clamp to be connected to meters with banana inputs.
It is an ideal companion to a ScopeMeter, power quality meter, or digital multimeter.
• Current ranges: 20 A and 200 A ac switchable
• Frequency range: 40 Hz to 40 kHz
• Safety rating: CAT III 600 V
i2000 Flex AC
Current Clamp
This current probe utilizes
the Rogowski (air-cored coil) principle. It can be used to measure currents up to 2000 A when used in conjunction with multimeters, recorders, or data loggers. The flexible and light- weight measuring head allows quick and easy installation on thick and hard-to-reach areas.
• Current range: 20 A, 200 A, and 2000 A ac switchable
• Frequency range: 10 Hz to 20 kHz
• Safety rating: CAT III 600 V
i1000s AC Current Clamp
This large ac current clamp expands applications in indus- trial and power environments by connecting directly to an oscilloscope using a reinforced coaxial cable and an insulated BNC connector. It is ideal for measuring distorted current waveform rms and harmonics.
• Current range: 0.2 A to 1000 A ac
• Frequency range: 5 Hz to 100 kHz
• Accurate displays due to a passive filter that eliminates noise and ring on rapidly- rising di/dt waveforms
• Optional PM9081/001 Dual Banana Plug Male to Female BNC Adapter is available for digital multimeters
• Safety rating: CAT III 600 V
AC-only clamps
Fluke current clamps provide accurate current measurements without breaking electric circuits.
Current clamps: AC