Page 74 - Fluke Test Tools Catalog

Fluke Temperature accessories
Turn your digital multimeter into a thermometer
Other temperature accessories
80TK Thermocouple Module
• Converts type K thermocouple signals into mV output
• Connects to DMM via standard banana plugs
• Switch selectable °C or °F
• Range: -50 °C to 1000 °C (-58 °F to 1832 °F)
• Includes 80PK-1 probe
80T-150UA Universal Solid State Temperature Probe
• For measurement
of air, surface and non-corrosive materials
• Measurement range:
-50 °C to 150 °C
(-58 °F to 302 °F)
• Output: 1 mV/°C or 1 mV/°F (switch
selectable)
• Connects to DMM via standard banana
plugs
80PK-8, 80PK-10, Pipe Clamp Temperature Probes
• Type K thermo-
couples clamp securely onto pipes for fast tempera- ture and superheat measurements
• Durable ribbon sensors
• 1 m (39 in) lead
• Measure from -29 °C to 149 °C
• 80PK-8 for 6.4 mm to 34.9 mm
(0.25 in to 1.375 in)
• 80PK-10 for 32 mm to 64 mm
(1.25 in to 2.5 in)
Thermocouple Plug Kits
700TC1
A kit of ten mini-plug connectors. One each of the following:
Type J (black)
Type K (yellow)
Type T (blue)
Type E (purple)
Type R/S (green) Type B or Cu (white) Type L (J-DIN) (blue) Type U (T-DIN) (brown) Type C (red)
Type N (orange)
700TC2
A kit of seven mini-plug connectors.
Type J (black), two Type K (yellow), two Type E (purple), one Type T (blue), one
Type R/S (green), one
80PK-18,
Pipe Clamp Temperature Probe Kit
• Includes both
80PK-8 and 80PK-10
Type K clamps
• Provides full range of pipe measurement sizes
• Includes soft carrying case to conve- niently keep both clamps handy for any situation
80CK-M and 80CJ-M Type K and J Male Mini-Connectors
• Isothermal screw ter-
80PJ-EXT, 80PK- EXT, 80PT-EXT Thermocouple Wire Extension Kits
For extending and repairing type J, K or T thermocouple wires.
• Kit includes
3 m (9 ft) of thermocouple wire and 1 pair of male/female mini-connectors
• Maximum con- tinuous exposure temperature: 260 °C (500 °F)
• 80PK-EXT is
compatible with type K thermome- ters; 80PJ-EXT is designed for type J thermometers, and 80PT-EXT is designed for type T thermometers
• • •
minal for K or J wire Suitable for up to 20 gauge thermocouple wire
Color coded to industry standards (K-yellow, J-black)
Two per package
Process tools accessories
BP7240
• Li-ion rechargeable battery; nominal
7.2 volt, 4400 mA hr
• Use with 750 Series Calibrators
BP7235
• NiMH rechargeable battery; nominal
7.2 volt, 3500 mA hr
• Use in 700 and 740 Series Calibrators
700LTP-1 Low Pressure Test Pump
Hand operated pressure pump designed to generate either vacuum to -13 psi/ -.90 bar or pressures to 100 psi/6.9 bar. Ideal for low pressure applications requiring accurate low pressure testing.
700ILF In-line Filter
The Fluke 700ILF can
be used to isolate the
calibrator from inciden-
tal contact with fluids.
Particularly useful with
the 718 calibrator to help keep mois- ture or oils from contaminating the on-board pump.
700PTP-1 Pneumatic
Test Pump
The Fluke 700PTP is a handheld pressure pump designed
to generate either vacuum to -11.6 psi/-0.8 bar or pressure
to 600 psi/40 bar.
700HTP-2 Hydraulic
Test Pump
The Fluke 700HTP is designed to generate pres- sures up to 10,000 psi/
700 bar. Use the Fluke 700PRV adjustable relief valves to limit pressures from 1360 psi to 5450 psi.
700HTH-1 Hydraulic Test Hose
The 700HTH is
a 10,000 psi,
700 bar test
hose that
connects to a
calibration unit under test from a Fluke 700HTP hydraulic test pump.
700PMP Pressure Pump
The 700PMP is a hand- operated pressure pump to provide pressures up to 150 psi/1000 kPa. Output fitting is 1/8 FNPT.
Fluke 700-IV
Current Shunt
Conversion factor:
10 mV = 1 mA
Accuracy (% of
input, one-year): 0.025 %
Input current: 0 mA to 55 mA Input resistance: 250 Ω nominal Output resistance: 10 Ω nominal Accuracy specification applies from +18 °C and 28 °C to 50 °C Maximum input voltage: 30 V dc
72
Accessories
For more information, go to www.fluke.com/accessories 72