Page 39 - Fluke Test Tools Catalog

Fluke 789 and 787 ProcessMeterTM Test Tools
(Fluke 789 only)
True
RMS
Fluke 789 ProcessMeter
The Fluke 789 ProcessMeter is the ultimate troubleshooting tool for process techni- cians, combining the functionality of a
loop calibrator with the power of a digital multimeter. Add the wireless data logging capabilities of Fluke ConnectTM with Share- LiveTM video call, process technicians can now do a lot more while carrying a lot less. • Unique new wireless measurement log-
ging capability
• Temperature measurement from -200 °C
to 1372 °C using the t3000 FC
• 24 V loop power supply
• CAT IV 600V rating
• HART mode setting with loop power
(adds 250 ohm resistor)
• Double-sized, dual display
Specifications
(Fluke 789 only)
Fluke 789
Fluke 787
• 20 mA drive into 1200 ohms
• Backlight with two brightness settings
• 0 % to 100 % mA Span Check buttons
to toggle between 4-20 mA
• Infrared I/O serial port compatible with
FlukeView® Forms Software
• Improved battery power with four AA
batteries
• Plus all the proven 787 features
Fluke 787 ProcessMeter
• Simultaneous mA and % of scale read- out on mA output
• 25 % Manual Step plus Auto Step and Auto Ramp on mA output
• Min/Max/Avg/Hold/Relative modes
• Externally accessible battery for easy
changes
Measurement function
Best accuracy range and resolution
(% of reading + LSD)
V dc
400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V
0.1 % + 1
V dc (true-rms)
400.0 mV, 4.000 V, 40.00 V, 400.0 V, 1000 V
0.7 % + 2
mA dc
30.000 mA
.05 % + 2
A dc
1.000 A (0.440 A continuous)
0.2 % + 2
A ac
1.000 A (0.440 A continuous)
1 % +2
Resistance
400.0 W, 4.000 k, 40.00 k, 400.0 k, 4.0 M, 40 M
0.2 % + 1
Frequency (0.5 Hz to 20 kHz)
199.99 Hz, 1999.9 Hz, 19.999 kHz
.005 % + 1
Diode test
789: 2.000 V (shows diode voltage drop) 787: 2.400 V (shows diode voltage drop)
2 % +1 2 % +1
Continuity
Beeps for resistance < approx. 100 ohms
Output function
Range and resolution
Drive capability
Accuracy (% of span)
DC current output (internal battery operation)
0.000 mA to 20.000 mA or 4.000 mA to 20.000 mA (selectable at power-up) Over-range to 24.000 mA
789: 24 V compliance or, 1,200 ohms,
@ 20 mA 787: 12 V compliance or, 500 ohms, @ 20 mA
.05 %
DC current simulate (external 24Vloop supply, up to 48Von 789 only)
0.000 mA to 20.000 mA or 4.000 mA to 20.000 mA, (selectable at power-up) Over-range to 24.000 mA
1000 ohms, @ 20 mA
.05 %
24 V loop supply
789: Minimum 24 V, 787: Not available
250 ohms @ 20 mA
> 24 V
Current adjustment modes
Manual: coarse, fine, 25 % and 100 % step (100 % step 789 only) Automatic: slow ramp, fast ramp, 25 % step
Temperature range of 18 °C to 28 °C, for one year after calibration.
Maximum voltage applied between any jack and earth ground:1000 V rms. Storage temperature: -40 °C to 60 °C. Operatingtemperature:-20°Cto55°C. Relativehumidity:95%upto30°C;75%upto40°C;45%upto50°C;35%upto55°C. Safety: Designed in accordance with EN61010, ANSI/ISA S82.01-1994 and CAN/CSA C22.2 No. 61010.1-92 Over-voltage CAT III.
Size (HxWxL)/weight (787 with holster): 52 mm x 98 mm x 201 mm (2.06 in x 3.86 in x 7.93 in)/638 g (1.4 lb).
Size (HxWxL)/weight (789): 50 mm x 100 mm x 203 mm (1.97 in x 3.94 in x 8.00 in)/600 g (1.3 lb).
Warranty: Three-year.
Ordering information
Included accessories
Models
Test leads, alligator clips, 4 AA alkaline batteries (installed), quick reference guide, users manual, multi-language manual CD.
FLUKE-789 ProcessMeter
Test leads, alligator clips, holster with test lead storage, one 9 V alkaline battery (installed), quick reference guide, users manual, multi-language manual CD.
FLUKE-787 ProcessMeter
789 ProcessMeter, T3000FC Wireless K-type temperature module, FLUKE IR3000FC Connector, TL71 Premium Test Lead Set, AC72 Alligator Clips, four AA alkaline batteries (installed), users manual and quick reference guide.
FLUKE-789/ Fluke Connect
T3000 FC ProcessMeter/Temp Kit
For more information, go to www.fluke.com/processmeters
Process Calibration Tools
37
Fluke ConnectTM accessories
ir3000 FC
Connector
Connect your Fluke 789 ProcessMeterTM with the
ir3000 FC Connector, and get all the benefits of the Fluke ConnectTM app. Be on the same page, even while
in different places. Wirelessly share measurements with your team—any- where, anytime.
t3000 FC
Wireless k-type temperature module (for use with
Fluke Connect App).
Fluke CarePlans www.fluke.com/Care-Plans
Maintain your test tool in top operating condition and control your cost of ownership with a Fluke CarePlan.
Check price and availability at
www.fluke.com/wtb
Recommended accessories
TPAK
Magnetic Meter Hanger See page 75
80T-150UA
Universal Temperature Probe See page 72
C115
Soft Carrying Case
See page 67
TL220
SureGrip Industrial Test Lead Set See page 68
TL175
TwistGuardTM Test Leads See page 70
80PK-8
Pipe Clamp Temperature Probe See page 72